![]() ![]() How fast is your 2080ti clocked at? overclocking gpu clock speed should net you better performance than cpu overclock, but overclocking the cpu to 4.9/5.0 if your gpu is overclocked to 2100mhz might get you more framerate then it does now if your gpu is running at 1800mhz. Is your RAM latency low? it should be at around CL15-15-15 for the best performance at 3600-3800mhz but you really need good ram chips to do that. I personally turn it off but if you want to use it, adjust the turbo modifier to very low. turbo will end up throttling your CPU clock speed down below 5ghz if you overclock it to 5ghz and don’t modify the turbo multiplier or turn off turbo, because turbo settings when unmodified with an overclock will boost 5ghz to 5.5, and then your cpu will throttle to manage the heat. ![]() Turn off turbo setting in bios, or change the multiplier to a lot lower. If its a gaming motherboard and z390 with good amount of heatsinks it should be fine but do your research on quality, and never skimp out on PSU quality, get at least a 650W gold or platinum rated 80+ power supply for overclocking or risk your computer randomly turning off or throttling because it cant deliver enough power, or worse damaging your components if the power supply shorts from a surge due to lack of surge protection. unfortunately the motherboard can’t monitor its own temperature so a good move to do would be to get a thermal monitoring gun so you can monitor the components of the motherboard if you overclock the cpu to make sure the motherboard VRMs doesnt go over 90 degrees, but considering you are already overclocking to 4.7 you should have a good motherboard designed to take that heat. The heat and voltage is the only real dangerous part of overclocking, and if thats controlled and you have good parts then your perfectly fine to do it without risk of degrading your components if you follow the rules i mentioned.Ī good motherboard is required for maximum lanes on your PCI ports and RAM buses to CPU and also because they have heatsinks on the VRMs and better cooling. Up to 80 degrees and you’re still okay but pushing it, intel cpus can generally take up to 90 degrees before things get risky from heat damaging your components. Install HWmonitor, TechPowerUp GPU-Z, CPU-Z and Speedfan (or better buy a fan controller) and keep your temperatures around 60 degrees under load and you’re gold. If you increase voltage you can overclock further at faster clocks, but then you get extra heat so you need a good cooling waterblock or aio cooler to compensate. ![]() Voltage should not go beyond 1.35V to be safe, but as long as you’re not going beyond 1.35 (thats a conservative number some people push to 1.4v) then you’ll be okay. I am very much a newbie in overclocking and I will explore more. So I switched back to 4.7ghz and kept the core voltage as low as possible, which is 1.27v for now. Yes I have achieved 5.0ghz, but the gain in FPS is surprisingly small. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |